Accredited Certification Bodies by South Africa National Accreditation System (SANAS) as of 1stOctober 2024 for Plumbing
The purpose of the matrix is twofold,
- To indicate that there are a few certification bodies which certify to South African National Standards (SANS) in every respect.
- To show in which areas they are accredited to certify in relation to plumbing.
The product will show the SANS designation together with Certifying Body’s (CB)stamp of approval. (Example of the full indelible stamp appearing on the product) Each certification body is equal as is their mark.
Water borne disease | Sanitary fixtures | Drainage pipe | Supply pipe | Taps and mixers | Water components | Water heating components | Protective Equipment
Category |
Standard (SANS) |
Title |
SANAS accreditation number |
Name of Certification Body |
Water Borne disease (back to top) |
||||
| 893 -1 | Legionella’s – Risk Assessment | N/A | N/A | |
| 893 -2 | Legionella’s – Control of Legionella’s in warm systems | N/A | N/A | |
Sanitary fixtures (back to top) |
||||
| 821:2007 | WC Flushing cisterns | C 86
C07a |
SABS Commercial SOC |
|
Drainage Pipe (back to top) |
||||
| 791:2014 | Unplasticized PVC-U sewer and drainpipes and pipe fittings | C07a
C25 |
SABS Commercial SOC
|
|
| 967:2021 | Unplasticized PVC-U soil, waste and vent pipes and fittings | C 07a
C25 |
SABS Commercial SOC
|
|
| 1601:2017 | Structured wall pipes and fittings of un plasticised for buried drainage and sewerage systems. Part 1 | C07a | SABS Commercial SOC | |
Supply pipe (back to top) |
||||
| 62-1-addendum 16-1 | Steel Pipes Part 1-pipes suitable for treading and nominal sizes | C25 |  |
|
| 15874 – 1,2,3,5 &7 | Plastic piping systems for hot and cold-water installations – (PP) | C84
C25 |
|
|
| 15875 – 1,2,3,5 &7 | Plastic piping system for hot & cold-water installations in buildings (PE -X) | C84
C07a |
SABS Commercial SOC |
|
| 15876-1,2,3,4,5&7 | Plastic piping systems for hot & cold-water installations in buildings (PB) | C84 | |
|
| 15877- 1, 2, 3 & 5 | Plastic piping system for hot & cold-water installations-chlorinated poly (vinyl chloride) PVC C | C84 | |
|
| 21003-1,2,3,4,5, & 7 | Multilayer piping systems for hot & cold-water installation in buildings | C84 | |
|
| NS 22391-1,2,3,4,5, & 7 | Plastic Pipe Systems for hot & cold-water installation of raised temperature (PERT | C84 | |
|
| 16422 | Pipes & joints made of orientated unplasticized ploy vinyl chloride for conveyance of water under pressure specifications (PVC-O) | C84
C25 |
|
|
| Jan-27 | Plastic Piping systems Polyethylene pipes and fittings for water supply Part 1: General (PE) | C84
C25 CO7a |
SABS Commercial SOC |
|
| Feb-27 | Plastic Pipe System Polyethylene pipes and fittings for water supply Part 2: Pipes (PE) | C84
CO7a |
SABS Commercial SOC |
|
| Mar-27 | Plastic Pipe System Polyethylene pipes and fittings for water supply Part 3: Fittings | C84 | |
|
| 11 | Unplasticised UPVC components for external rainwater systems | C07a | SABS Commercial SOC | |
| 966 – 1 | Components of pressure pipe systems Part 1: PVC – U pressure pipe system | CO7a
C25 |
SABS Commercial SOC
|
|
| 966- 2 | Components of pressure pipe systems Part 2: modified PVC – M pressure pipe systems | CO7a
C25 |
SABS Commercial SOC
|
|
| 14236:2000 | Plastic Pipes and fittings: Mechanical- joint compression fittings for use with polyethylene pressure pipes in water supply systems | C84 | |
|
| 17885:2019 | Plastic Pipe system – Mechanical fittings for pressure piping systems specifications | C84 | |
|
| 8770:2000 | Plastic Pipe systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) | C84 | |
|
Taps and Mixers (back to top) |
||||
| 226:2016 | Water taps (metallic bodies) | C115
C07a C86
|
SABS Commercial SOC
|
|
| 1021:2007 | Water taps (Plastic bodies) | C86 | |
|
| 1480:2005 | Single control mixer taps | C115
C86 C07a C25 |
SABS Commercial SOC
|
|
| 1808-5 | Water supply and distribution system components Part 5 – Flexible Connectors | C25 | |
|
| 1808-9 | Water supply and distribution system components 9: 2016 – Metering taps and valves (metallic bodies) | C86
Co7a C115 |
SABS Commercial SOC
|
|
| 1808:16:00 | Water supply and distribution system components Part 16 – Drinking fountain Taps | C86
C07a |
SABS Commercial SOC |
|
| 1808 – 35 | Water supply and distribution system components Part 35- electronic operated taps and valves | C115
C86 C07a |
SABS Commercial SOC |
|
| 1808-53 | Water supply and distribution system components Part 53 – Drain cocks for hot water storage containers | C115
C86 C07a |
SABS Commercial SOC |
|
| 1808 -66:2005 | Water supply & distribution components part 66 – Demand type water | C115
C86 C07a |
SABS Commercial SOC |
|
Water components (back to top) |
||||
| 1056-2 | Ball Valves Part 2: Light duty valves (not fire safe) | None | ||
| 1056 -3 | Ball Valves part 3: Heavy duty valves (not fire safe) | C07a | SABS Commercial SOC | |
| 1067 – 1 | Copper based fittings for copper tubes Part 1: Compression fittings |
C07a, C25 | |
|
| 1067 2- | Copper based fittings for copper tubes Part 2: Capillary solder fittings |
Co7a | |
|
| 1086 | Flexible PVC pressure hose | C25 | |
|
| 1240:2016 | Automatic shut off valves for water closets and urinals | C86
C07a |
SABS Commercial SOC |
|
| 1506-3 | Ball valves Part 3: light duty valves (not fire safe) | C25 | |
|
| 1509 | Flush valves for WC flushing cisterns | C07a
C86 |
SABS Commercial SOC
|
|
| 1750: 2017 | Servicing valves for domestic terminal water fittings | C86
C25 |
|
|
| 1808-10 | Water supply and distribution system components Part 10 – Copper alloy check valves (spring loaded) | C07a | SABS Commercial SOC | |
| 1808-5 | Water supply and distribution system components Part 5 – flexible connectors | C115
C86 C07a |
SABS Commercial SOC |
|
| 1808 – 58 :2010 | Water supply and distribution system components Part 58 – Inline strainers | C86 | |
|
| 1865:2013 | Point of use drinking water treatment units | C07a
C115 |
SABS Commercial SOC
|
|
| 664-1 | Wedge gates and resilient seal valves for waterworks Part 1: General | C07a | SABS Commercial SOC | |
| 664-2 | Wedge gates and resilient seal valves for waterworks Part 2: Wedge gate valves | C07a | SABS Commercial SOC | |
| 664 -3 | Wedge gates and resilient seal valves for waterworks Part 3: Resilient seal valves | C07a | SABS Commercial SOC | |
| 752:2009 | Float valves | C86, C07a |
SABS Commercial SOC |
|
| 50681 | Elastomeric seals – material required for pipe joints. Seals used in water and drainage applications- Part 1 | C25 | |
|
Water heating components (back to top) |
||||
| 1307 | Domestic solar water heaters | C07a | SABS Commercial SOC | |
| 151:2022 | Fixed electric storage water heaters | C115
C07a |
SABS Commercial SOC |
|
| 198:2012 | Functional control valves for domestic hot and cold-water supply systems | C115
C86 C07a |
SABS Commercial SOC |
|
| 1299:2015 | Tempering valves for storage hot water systems | C115 | |
|
| 1848:2011 | Geyser Drip Trays | C86 | |
|
| 497:2011 | Glazed Ceramic Ware | C86
C07a |
SABS Commercial SOC |
|
Protective Equipment (backto top) |
||||
| 434:2018 | General Protective Clothing | C07a | SABS Commercial SOC | |
| 20347 | Personal protective equipment – Occupational footwear | C25 | |
|
| 20345:2014 | PPE – safety footwear | C07a | SABS Commercial SOC | |
| 50354 | Personal protective equipment against falls from a height – Lanyards | C25 | |
|
| 50355 | Personal Protective Equipment for work positioning and prevention of falls from a height – Belts for work | C25 | |
|
| 50358 | Positioning and restraint and work positioning lanyards | C25 | |
|
| 50361 | Personal protective Equipment against falls from a height – full body harnesses | C25 | |
|
| 1379:2005 | Industrial Safety helmets | C07a | SABS Commercial SOC | |